KitchenAid KUDH03DTBL Installation Instructions - Page 17
Install Panel Fasteners, Mount the Custom Panel
UPC - 883049140728
View all KitchenAid KUDH03DTBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Install Panel Fasteners 1. Remove the two panel fasteners from the face of the inner door of the upper drawer. 3. Using the screws provided, secure the custom panel to the inner door by screwing through the inner door and into the ¹⁄₈" (3.175 mm) pilot holes. 2. Screw the two panel fasteners into the panel fastener pilot holes of the custom panel. 3. Repeat steps 1 and 2 for the lower drawer. Mount the Custom Panel 1. Mount the upper custom panel to the drawer by aligning the panel fasteners to the two keyhole slots and insert the panel. 4. Repeat steps 1 to 3 for the lower drawer. NOTE: There will only be 4 pilot holes (2 on the left and 2 on the right) for the lower drawer. 2. To secure the custom panel onto the drawer, push the custom panel down until the top of the custom panel is flush with the top of the control panel. 17