KitchenAid KUDS03FTPA Installation Instructions - Page 12

9. Install the two #8-18 x 1-3/8" screws from the literature package in the top corners, as shown. Align top edges of full front panel and console; tighten corner screws. For dishwashers with the control panel shown below: (Models KUDC03IT, KUDK03IT and KUDL03IT) 2 screws align top edges 1-3/8"screw 10. Tighten the two side screws reinstalled in Step 8. 11. Reinstall and tighten the three remaining side screws. (Your model may vary slightly from picture above.) Custom door panel dimensions are: 23-3/8" (59.4 cm) 3/4" (19.1 mm) *25-29/32" (65.8 cm) Custom panel dimensions IMPORTANT: You need to know what control panel is on your dishwasher before you order your custom door panel. For dishwashers with the control panel shown below: (models KUDS03FTPA and KUDU03FTPA) (Your model may vary slightly from picture above.) Custom door panel dimensions are: 1/8" (3.2 mm) 1/8" (3.2 mm) *This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm). Follow directions in Option #2 of "Install custom panel" section. 23-1/2" (59.7 cm) *30-3/16" (76.7 cm) 3/4" (19.1 mm) *This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm). Follow directions under Option #1 of "Install custom panel" section. 12