KitchenAid KXU2830YSS Installation Guide - Page 7

Cabinet Dimensions Interior-mounted blower motor model 10" (25.4 cm) A 12.7 mm) minimum Exterior-mounted blower motor model ¹⁄₂" (12.7 mm) minimum 21 54.1 cm) 21 54.1 cm) Cutouts are for 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent system. Locate power supply junction box at lower left hand rear corner of the cabinet. Centerline of cooktop cutout NOTES: ■ See cooktop manufacturer's instructions for cooktop cutout depth and width. ■ Use dimensions for vent system cutout location that applies to your installation. ■ Interior-mounted blower systems connect with 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent system. The cutout locations for this vent system will depend on your specific installation. Locate power supply junction box at lower left hand rear corner of the cabinet. NOTES: ■ See cooktop manufacturer's instructions for cooktop cutout depth and width. ■ Exterior-mounted blower systems connect with 10" (25.4 cm) round vent. The cutout locations for this vent system will depend upon your specific installation. Countertop Cutout Dimensions IMPORTANT: Countertops with a bull-nosed front edge are not recommended for these installations. Some models require a countertop deeper than 25" (63.5 cm); see the following Countertop Cutout Dimensions Chart. To avoid mistakes, it is recommended that the cooktop and vent cutouts be drawn on the countertop before making any cutouts. See Cooktop Installation Instructions for complete cutout dimensions, location dimensions and installation details. D E F B C G H A I A. Downdraft vent B. Cooktop C. Measurement of cooktop rear overhang. D. D = Measurement of cooktop rear overhang (C) + 1 46.2 mm] (E) E. 1 46.2 mm) F. ½" (12.7 mm) minimum G. ¼" (6.4 mm) minimum H. Countertop and backsplash I. ½" (12.7 mm) minimum 7