Kodak 834 4269 User Guide - Page 11

Using your Camera with a POCKETWIZARD Radio Transceiver Setting the Zone If you have selected a channel between 17 - 32, you can assign different zones to remote devices, then turn the zones on or off. For example, if you have several flashes in your studio setup you can assign different zones to flashes, then turn some zones on and some off. This way you can decide which flashes will be used without making manual adjustments. Setting the Transmit Zone When your camera is in Transmit mode, you can specify the zones you will transmit to. 1. Choose Transmit, then choose Zone A, B, C, or D. 2. Choose On or Off. 3. Press the OK button. 4. Repeat for all four zones. Setting the Receive Zone When your camera is in Receive mode, enter the zone as determined by the setup. NOTE: If you are on channels 1 - 16, you will not select a zone. If you are on channels 17 - 32, you may select a single zone in Receive mode. 1. Choose Receive, choose Zone, then choose A, B, C, or D. 2. Press the OK button. July 12, 2004 1-7