Kodak 834 4269 User Guide - Page 6
Initial Setup, Using your Camera with a POCKETWIZARD Radio Transceiver
UPC - 041778344262
View all Kodak 834 4269 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Using your Camera with a POCKETWIZARD Radio Transceiver Initial Setup To use the POCKETWIZARD feature you must prepare the cameras and flash units that you will be using. All devices must be equipped with or connected to a POCKETWIZARD Radio Transceiver. 1. Screw the POCKETWIZARD antenna into the PC Sync terminal of any cameras (with a POCKETWIZARD Radio Transceiver) in your setup. CAUTION: Do not screw the POCKETWIZARD antenna too tightly. Doing so can damage the antenna. 2. Set the appropriate POCKETWIZARD mode in each transmitting and receiving device (see page 1-5). 3. Set the channel and zones in the transmitting and receiving devices. If a receiving device has no user interface, use the Teach Channel feature on the camera to "teach" it the appropriate values (see page 1-12). If you don't connect the antenna to your camera (or if the antenna is damaged), the following screen appears when you capture an image in POCKETWIZARD mode. 1-2 July 12, 2004