Kodak CX6200 User's Guide - Page 87
Problem, Cause, Solution, Change to Auto flash or Flash Off
![]() |
View all Kodak CX6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 10 Problem Cause Solution In Review mode, The camera may not be Check the picture storage you do not see a accessing the correct location setting (page 12). picture (or the storage location. expected picture) on the camera screen. Picture is too dark. Flash is not on. The subject is too far away for the flash to have an effect. Turn on the flash (page 21). Move so there is no more than 7.9 ft (2.4 m) between the camera and the subject. The subject is in front of Use Fill flash (page 21) or a bright light (backlit). change your position so light is not behind the subject. Not enough light. Increase Exposure Compensation (page 24). Picture is too The flash is not needed. Change to Auto flash or Flash Off light. (page 21). The subject was too close for flash. Move so there is at least 1.6 ft (0.5 m) between camera and subject. Too much light. Decrease Exposure Compensation (page 24). 75
![](/manual_guide/products/kodak-cx6200-users-guide-e381c8c/87.png)