Kodak CX6200 User's Guide - Page 88

Adjust the camera Video Out, external video

Page 88 highlights

Chapter 10 Problem Cause Solution In Review mode, a The picture has no blue screen is thumbnail or an displayed instead unrecognized of a picture. thumbnail. Transfer the picture to the computer (page 61), or delete the picture (page 37). Picture is not clear. The lens is dirty. Clean the lens (page 94). Subject too close when Move so there is at least 19.7 in. taking picture. (50 cm) between the camera and the subject. Subject or the camera Place the camera on a flat, steady moved while the picture surface or use a tripod. was taken. The subject is too far Move so there is no more than away for the flash to be 7.9 ft (2.4 m) between the effective. camera and the subject. Slide show does not run on external video device. Video Out setting is incorrect. External device is set incorrectly. Adjust the camera Video Out setting (NTSC or PAL, page 53). See the external device's user's guide. Camera freezes Camera detected an up when a card is error when the card inserted or was inserted or removed. removed. Turn the camera off, then back on. Make sure the camera is turned off before inserting or removing a card. 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

76
Chapter 10
In Review mode, a
blue screen is
displayed instead
of a picture.
The picture has no
thumbnail or an
unrecognized
thumbnail.
Transfer the picture to the
computer (
page 61
), or delete
the picture (
page 37
).
Picture is not
clear.
The lens is dirty.
Clean the lens (
page 94
).
Subject too close when
taking picture.
Move so there is at least 19.7 in.
(50 cm) between the camera
and the subject.
Subject or the camera
moved while the picture
was taken.
Place the camera on a flat, steady
surface or use a tripod.
The subject is too far
away for the flash to be
effective.
Move so there is no more than
7.9 ft (2.4 m) between the
camera and the subject.
Slide show does
not run on
external video
device.
Video Out setting is
incorrect.
Adjust the camera Video Out
setting (NTSC or PAL,
page 53
).
External device is set
incorrectly.
See the external device’s user’s
guide.
Camera freezes
up when a card is
inserted or
removed.
Camera detected an
error when the card
was inserted or
removed.
Turn the camera off, then back
on. Make sure the camera is
turned off before inserting or
removing a card.
Problem
Cause
Solution