Kodak CX7430 User Manual - Page 14

Flash/Status screen, Storing pictures on an SD/MMC card - memory card

Page 14 highlights

Getting started Flash/Status screen Press the Flash/Status button. The current camera status icons are displayed in the bottom half of the Flash screen. Other settings Storing pictures on an SD/MMC card Your camera has 16 MB of internal memory. You can purchase optional SD/MMC cards for removable, reusable storage for your pictures and videos. CAUTION: The card can only be inserted one way; forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera. To insert an SD/MMC card: Notched 1 Turn off the camera. corner 2 Open the card door. 3 Orient the card as shown on the camera body. 4 Push the card into the slot to seat the connector. 5 Close the door. To remove the card, turn off the camera. Push the card in, then release it. When the card is partially ejected, pull it out. See page 51 for storage capacities. Purchase SD/MMC cards at a dealer of Kodak products or www.kodak.com/go/cx7430accessories. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

Getting started
7
Flash/Status screen
Press the Flash/Status button. The current camera status icons are displayed in
the bottom half of the Flash screen.
Storing pictures on an SD/MMC card
Your camera has 16 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
1
Turn off the camera.
2
Open the card door.
3
Orient the card as shown on the camera body.
4
Push the card into the slot to seat the
connector.
5
Close the door.
To remove the card, turn off the camera. Push the card in, then release it.
When the card is partially ejected, pull it out.
See
page 51
for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or
www.kodak.com/go/cx7430accessories.
Other settings
Notched
corner