Kodak DC4800 User Manual - Page 87
Change to Auto flash. See, Make sure the Picture Card
UPC - 041771465087
View all Kodak DC4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Camera Problem Cause Solution Picture is too light. The flash is not needed. Change to Auto flash. See page 25. The subject is too Move so there is at least 1.6 ft close when the (0.5 m) between the camera flash was used. and the subject. The light sensor is Hold the camera so your hands covered. or other objects do not cover the light sensor. The Exposure Compensation is set incorrectly. Decrease the Exposure Compensation. See page 30. Stored pictures are damaged. The Picture Card Make sure the Picture Card was removed when access light is not blinking the Picture Card before removing the card. access light was blinking. Pictures remaining Image Resolution The camera is operating number does not and Quality settings normally. Continue taking decrease after taking a do not take up pictures. picture. sufficient space to decrease the picture remaining number. 8 79