Kodak DP2000 User's Guide - Page 48
Troubleshooting
View all Kodak DP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
User's Guide KODAK DP2000 Digital Projector Troubleshooting Problem: Nothing on projection screen • Make sure that the power cord is properly connected to a fully functional AC electrical outlet. Make sure that the power cord is also properly connected to the projector. • If the projector is plugged into a power strip, make sure the power strip is turned on. • Make sure you have removed the lens cap on the projection lens at the front of the projector. • Make sure the lamp is switched on. • Check the projector's lamp to ensure that it is securely connected in the lamp module. See "Replacing the Projection Lamp" on page 38. • Make sure that the cables do not have any bent pins. Problem: Color or text not being projected • You might need to adjust the brightness up or down until the text is visible. Refer to "Brightness" on page 26 for more information. Problem: The screen resolution is not right • Make sure the computer's video card is set for a resolution of no greater than 1024 x 768. Problem: Image isn't centered on the screen • Move the projector to reposition the image. • Reposition the image using the software. Refer to "Horizontal position" on page 29 and "Vertical position" on page 30. • Be sure the projector is at a 90 degree angle to the screen. 42