Kodak DX6340 User Manual - Page 86
Installing the Custom Camera Insert, Remove the Universal Insert - easyshare digital camera
UPC - 041771559106
View all Kodak DX6340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 9 Installing the Custom Camera Insert A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000 series and LS600 series cameras to use the camera dock. A custom insert is included with your camera. It provides a perfect fit for your Kodak EasyShare DX6340 zoom digital camera. Remove the Universal Insert 1 Place your thumbs against the front of the universal insert. Press in and lift. 2 Lift the side edge of the insert, then remove the insert from the dock. 3 Save the universal insert as a spare. Install the Custom Insert Cutout 1 Position the custom insert so the cutout lines up with the camera dock connector. 2 Fit the insert into the groove in the dock. Snap it into place. Connector NOTE: To order a custom insert for your camera, visit our Web site at www.kodak.com/go/dx6340accessories. 74