Kodak Esp-3 User guide - Page 52

No Communication with Computer, Corrective Action, Probable Cause 3

Page 52 highlights

Chapter 8 Corrective Action Make sure the scanner glass is completely clean or the pictures might not scan properly (see Cleaning the Scanner Glass). Probable Cause 3 The scanner lid is dirty. Corrective Action Clean the scanner lid (see Cleaning the Scanner Lid). No Communication with Computer Probable Cause Your Kodak printer is not connected to your computer. Corrective Action • Make sure your printer is plugged in and turned on. • Make sure you are using the proper USB cable. • Check the connection from your computer to your printer. Ensure that the square end of the USB cable is plugged in to the USB port on the back of your printer, and the flat end into a USB port on your computer. • You may need to disconnect other printers or scanners from your computer. • After checking connections, restart your computer. • Make sure your computer meets the minimum system requirements. Upgrade your system if necessary. For more information on connecting your printer to your computer, see the Setup Guide that came with your printer. 46 Kodak ESP 3 All-in-One

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

Chapter 8
Corrective Action
Make sure the scanner glass is completely clean or the pictures might not scan properly (see
Cleaning the Scanner Glass
).
Probable Cause 3
The scanner lid is dirty.
Corrective Action
Clean the scanner lid (see
Cleaning the Scanner Lid
).
No Communication with Computer
Probable Cause
Your Kodak printer is not connected to your computer.
Corrective Action
Make sure your printer is plugged in and turned on.
Make sure you are using the proper USB cable.
Check the connection from your computer to your printer. Ensure that the square end of the
USB cable is plugged in to the USB port on the back of your printer, and the flat end into a USB
port on your computer.
You may need to disconnect other printers or scanners from your computer.
After checking connections, restart your computer.
Make sure your computer meets the minimum system requirements. Upgrade your system if
necessary.
For more information on connecting your printer to your computer, see the Setup Guide that came
with your printer.
46
Kodak ESP 3 All-in-One