Kodak Z1085IS Extended user guide - Page 57
Camera/computer communications, LCD messages, Try one or more of the following, The Add New - driver
UPC - 041771920296
View all Kodak Z1085IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Troubleshooting If Try one or more of the following Ready light glows ■ Transfer pictures to the computer (see page 44), delete pictures from steady red. the camera (see page 15), switch image storage locations (see page 30), or insert a card with available memory (see page 3). ■ Wait. Resume picture taking when the light turns off. ■ Change the image storage location to internal memory (see page 30), or use a different card. Ready light is off or ■ Camera is operating normally. glows steady green. Camera/computer communications If Try one or more of the following The computer does ■ Turn on the camera (see page 2). not communicate ■ Install new batteries (see page 1) or charge rechargeable batteries. with the camera. ■ Connect cable to camera and computer port (see page 44). ■ Install the software (see page 43). ■ Disconnect the USB cable. Close all open applications. Re-install the software (see page 43). ■ Disconnect camera from the computer. Close all software applications, reconnect camera. Cannot transfer pictures. (The Add New Hardware Wizard cannot locate drivers.) ■ Disconnect USB cable. (If using camera dock or printer dock, disconnect cable and remove camera from dock). Close all open applications. Re-install the software (see page 43). ■ Disconnect the USB cable. Close all open applications. Re-install the software (see page 43). LCD messages If No images to display Try one or more of the following ■ Change image storage location setting (see page 30). www.kodak.com/go/support 51