Kodak ZD8612 Extended user guide - Page 54
Try one or more of the following, Adjust the camera Video Out setting NTSC or PAL
View all Kodak ZD8612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Troubleshooting If Try one or more of the following In Review mode, a ■ Transfer the picture to the computer (see page 43), then format the blue or black card or internal memory (see page 34). screen is displayed Caution: Formatting a card deletes all pictures and videos, instead of a including protected files. picture. ■ Take another picture. If screen is still blue or black, visit www.kodak.com/go/z8612support and select Interactive Troubleshooting and Repairs. Shutter button does not work. ■ Turn on the camera (see page 2). ■ Wait until the Image Storage icon stops blinking red before attempting to take another picture. ■ Transfer pictures to the computer (see page 43), delete pictures from the camera (page 17), switch image storage locations (see page 32), or insert a card with available memory (page 3). ■ If problem persists, visit www.kodak.com/go/z8612support and select Interactive Troubleshooting and Repairs. Slide show does ■ Adjust the camera Video Out setting (NTSC or PAL, see page 34). not run on external video device. ■ See the external device's user's guide. Picture is too light. ■ When using the flash, move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Decrease Exposure Compensation (see page 37). Picture is not clear. ■ Clean the lens (see page 59). ■ Make sure your camera is not in Close-up mode. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Place the camera on a flat, steady surface or use a tripod. 48 www.kodak.com/go/support