Kodak cd1013 User Manual - Page 46

Troubleshooting If... Try one or more of the following In Review mode, a I Transfer the picture to the computer (see page 35). blue or black screen is displayed I Take another picture. If problem continues, try internal memory and/or another memory card. instead of a picture. Shutter button does not work. I Turn on the camera (see page 2). I Transfer pictures to the computer (see page 35), delete pictures from the camera (see page 14), switch image storage locations (see page 27), or insert a card with available memory (see page 3). Picture is too light. I Move so there is at least 2 ft (0.6 m) between the camera and the subject. I Decrease Exposure Compensation (see page 29). Picture is not clear. I Clean the lens (see page 48). I Make sure your camera is not in Close-up mode. I Move so there is at least 2 ft (0.6 m) between the camera and the subject. I Place the camera on a flat, steady surface or use a tripod. Picture is too dark. I Turn on the flash (see page 7). I Move so there is no more than 10.5 ft (3.2 m) in wide angle and 5.9 ft (1.8 m) in telephoto between the camera and the subject. I Use Fill flash (see page 7) or change your position so light is not behind the subject. I Increase Exposure Compensation (see page 29). Camera does not I Purchase a certified SD or SDHC card. recognize SD/SDHC card. I Insert a card into the slot, then push to seat (see page 3). Camera freezes up I Turn the camera off, then back on. Make sure the camera is turned off when a card is before inserting or removing a card. inserted or removed. 40 www.kodak.com/go/support