Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Safety Inf - Page 15

Danger, Warning, Caution, Prohibited

Page 15 highlights

2 2.2 Warnings and Precautions for Roll Winder RW-101/Roll Winder RW-201 2.2 Warnings and Precautions for Roll Winder RW-101/Roll Winder RW-201 This manual provides information necessary for the use of Roll Winder RW-101 and Roll Winder RW-201. Read this manual thoroughly before use to ensure you understand how to use these units properly and use them correctly. Always keep this manual handy when working with the units. Also keep it in an easily accessible place for future reference where it will not get dirty or damaged. 2.2.1 General Information on Safety 1 When transporting or installing the units, always wear safety shoes, and also working gloves (if necessary). 2 When operating the machine, always wear safety shoes (with a protective steel toe cap), a safety cap for head protection, and a jacket with buttons or fasteners on the front and with the gathered cuffs or those which can be fastened with buttons. Always fasten the buttons and the fasteners properly. 3 To prevent the machine trouble, do not install the units in the following places: • A place where the ambient temperature drops below 0°C (32°F) or exceeds 40°C(104°F) • A place where the relative humidity drops below 30% or exceeds 80%, or where condensation occurs • A place subject to dust, salt, metal particles, or oily smoke • A place where water, oil, or chemical substances may be splashed 4 The control panel is categorized "type 1 enclosure (for use in pollution degree 2)." 2.2.2 Warning Classification Warning labels are used differently as follows depending on the situation in this manual and on the products. Understand these labels thoroughly and follow the instructions described below. The following safety precautions contain the preventive measures that shall be taken by users to avoid dangers. Category Description DANGER This label is used for the precautions and warning labels used for the locations where there is a risk of danger that may lead to the death or serious injury of an operator unless the danger is eliminated. WARNING This label is used for the precautions and warning labels used for the locations where there is a potential risk of danger that may lead to the death or serious injury of an operator unless the danger is eliminated. CAUTION This label is used for the precautions and warning labels used for the locations where there is a risk of danger that may lead to the minor injury or moderate injury of an operator unless the danger is eliminated. PROHIBITED This label is used for the descriptions of the prohibited operations and actions. This label especially indicates the possibility of the occurrence of a serious damage on this machine and the possibility of the cases where users cannot take our guarantee, maintenance, and service. CAUTION This label is used for the instructions and guidelines about operations and actions. This label especially indicates that this machine may be physically damaged unless particular attentions are given. These labels shall be attached to the positions where users can always see and check the labels. When a label has been peeled off or soiled, replace it with a new one. 2-8 Accurio Label 190/bizhub PRESS C71cf

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Warnings and Precautions for Roll Winder RW-101/Roll Winder RW-201
2
2-8
Accurio Label 190/bizhub PRESS C71cf
2.2
2.2
Warnings and Precautions for Roll Winder RW-101/Roll Winder
RW-201
This manual provides information necessary for the use of
Roll Winder RW-101
and
Roll Winder RW-201
.
Read this manual thoroughly before use to ensure you understand how to use these units properly and use
them correctly.
Always keep this manual handy when working with the units. Also keep it in an easily accessible place for
future reference where it will not get dirty or damaged.
2.2.1
General Information on Safety
1
When transporting or installing the units, always wear safety shoes, and also working gloves (if neces-
sary).
2
When operating the machine, always wear safety shoes (with a protective steel toe cap), a safety cap
for head protection, and a jacket with buttons or fasteners on the front and with the gathered cuffs or
those which can be fastened with buttons. Always fasten the buttons and the fasteners properly.
3
To prevent the machine trouble, do not install the units in the following places:
A place where the ambient temperature drops below 0°C (32°F) or exceeds 40°C(104°F)
A place where the relative humidity drops below 30% or exceeds 80%, or where condensation oc-
curs
A place subject to dust, salt, metal particles, or oily smoke
A place where water, oil, or chemical substances may be splashed
4
The control panel is categorized “type 1 enclosure (for use in pollution degree 2).”
2.2.2
Warning Classification
Warning labels are used differently as follows depending on the situation in this manual and on the products.
Understand these labels thoroughly and follow the instructions described below.
The following safety precautions contain the preventive measures that shall be taken by users to avoid dan-
gers.
These labels shall be attached to the positions where users can always see and check the labels. When a
label has been peeled off or soiled, replace it with a new one.
Category
Description
DANGER
This label is used for the precautions and warning labels used
for the locations where there is a risk of danger that may lead
to the death or serious injury of an operator unless the danger
is eliminated.
WARNING
This label is used for the precautions and warning labels used
for the locations where there is a potential risk of danger that
may lead to the death or serious injury of an operator unless
the danger is eliminated.
CAUTION
This label is used for the precautions and warning labels used
for the locations where there is a risk of danger that may lead
to the minor injury or moderate injury of an operator unless
the danger is eliminated.
PROHIBITED
This label is used for the descriptions of the prohibited oper-
ations and actions. This label especially indicates the possi-
bility of the occurrence of a serious damage on this machine
and the possibility of the cases where users cannot take our
guarantee, maintenance, and service.
CAUTION
This label is used for the instructions and guidelines about op-
erations and actions. This label especially indicates that this
machine may be physically damaged unless particular atten-
tions are given.