Konica Minolta AccurioPress 6136P AccurioPress 6136/6136P/6120 Auto Inspection - Page 19
Notice
View all Konica Minolta AccurioPress 6136P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2.2 Checking the Automatic Inspection Level 2 5 Check the automatic inspection report. Check the report following the procedure described in "4.1 Confirming the Automatic Inspection Report" in this manual. Check whether the levels specified in step 2 match the values framed in red. NOTICE The result of automatic inspection may vary depending on whether any subtle changes are made for each print job. Perform automatic inspection three to five times and then judge the combined results. 6 If adjustment is required, repeat steps 2 to 5. NOTICE Visibility may differ between the actual output original and the automatic inspection test chart. If necessary, configure settings again in [Auto Inspection Level Detailed Setting]. Automatic Inspection Operation Manual 2-12