Konica Minolta AccurioPress 6136P AccurioPress 6136/6136P/6120 Auto Inspection - Page 71
If an Out-of-Range Image is Detected, Status, Cause, Remedy, The message Too Many
View all Konica Minolta AccurioPress 6136P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
8.1 If an Out-of-Range Image is Detected 8 No. Status Cause Remedy 5 Message "alignment er- The system failed in An alignment failure may occur on a ror" is displayed on the alignment between the pale image or a simple image of ruled bookmark of the out-of- reference image and the lines only. range image report. inspection image. When this error recurs on a specific im- age, set the entire target page to an ex- cluding area in [Inspection Excluding Area]. For details, refer to "6. Automatic In- spection Area" in this manual. A large stain is found on an image. If any stain is found on the reference image, create a reference image again. If any stain is found on printouts, perform automatic inspection again after carrying out maintenance of this machine. The printed image is completely different from the reference image. Check whether the print job matches the reference image. If no problems are identified, create a reference image again. 6 The message "Too Many One hundred or more Stains may be seen in the paper feed- Stains" is displayed on stains, which is in the ing route. Perform maintenance for this the bookmark of the out- standard, were detected. machine. of-range image report. (Such stains are not out For details, refer to [Perform mainte- of range, so a comment nance] or [Adjustments] in the HTML marked by a red circle is User's Guide. not displayed.) 7 Message "Inspection The paper size is differ- Check whether the print job matches failed" is displayed on ent between the refer- the reference image. If no problems are the control panel. ence image and the print identified, create a reference image job. again. Automatic Inspection Operation Manual 8-3