Konica Minolta Fujitsu fi-6670/fi-6770 Operation Guide - Page 109
Condition, Description, In the [TWAI
View all Konica Minolta Fujitsu fi-6670/fi-6770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 5 Various Documents 4 Select the [Job/Cache] tab, and then specify the desired multifeed detection condition at [Multifeed Detection] under [ADF Option]. The following list the multifeed detection conditions: Condition Description None Does not detect multifeeds. Check Overlap- Monitors both document overlapping and length ping and Length to detect multifeeds. Check Overlapping Uses the built-in ultrasonic sensors inside the ADF to monitor document sheets during feeding, and to judge multifeeds according to the deviation of reflected ultrasonic waves. Check Length Monitors the length of document during feeding, and judges multifeeds according to the deviation of lengths sensed. For details of the multifeed detection, refer to "Multifeed Detection Conditions" (on page 45). 5 Click the [OK] button. ⇒ You are returned to the [TWAIN Driver (32)] dialog box. 6 In the [TWAIN Driver (32)] dialog box, click the [OK] button. ⇒ Changes made are saved. 7 From ScandAll PRO, perform a scan. For how to perform a scan, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51). TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 109