Konica Minolta KIP 700 KIP 700 User Manual

Konica Minolta KIP 700 Manual

Get Konica Minolta KIP 700 PDF manuals and user guides View all Konica Minolta KIP 700 manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta KIP 700 manual content summary:

  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 1
    KIP 7100 - User Manual Version A1
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 2
    explanations for the KIP 700m. Please read this Hardware Operation Guide carefully before using the printer. Please keep this Hardware Operation Guide for future reference. 1. When this product is installed in North America. This device complies with part 15 of the FCC Rules. Operation is subject to
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 3
    or operation of the printer. The following symbols are found throughout the USER'S Manual and have the following meaning: WARNING This WARNING mark means that there is a possibility of death or serious injury if you ignore or do not follow the said instruction. CAUTION This CAUTION mark means
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 4
    , please contact your service personnel. 1. Do not remove the screw and do not open the cover if not instructed to do so in this User's Manual. If you ignore this warning, you may be burnt or receive an electric shock due to a hot item or electrically charged part inside of the printer. 2. Do not
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 5
    the printer from the outlet for safety. Do not pull the cord when you unplug the printer as you may damage the Power Cord. There are hot items inside of the printer. Take great care not to touch these items when you remove mis-fed media. Ventilate the room well if you print in
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 6
    POWER CORD INSTRUCTION The installation of (or exchange to) a power plug which fits in wall outlet in the installation, the customer shall install an appropriate outlet. Connector Type: Configuration Standard IEC60320:C13 Rating 10A 250V (IEC) 15A 125V (UL) Usually found in Plug Type: Model
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 7
    Prohibited from Duplication 1. 3 Features 1. 4 Specifications 1. 4. 1 General 1. 4. 2 Printer part 1. 4. 3 Scanner part 1. 5 Appearance 1. 5. 1 Front view 1. 5. 2 Rear view 1. 6 Specifications for the Scan Original 1. 7 Specifications for the Printing Paper 1. 7. 1 Papers not available to use
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 8
    printer image quality Drum to strong (intense) light as this will damage the Drum operation. (Refer to the following figure.) The equipment must be leveled and the floor strength must be ample to sustain the weight of the equipment. 20cm/8" or larger with no option (Rear) 10cm/4" or larger KIP 700m
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 9
    ticket, etc.), commutation ticket or book of tickets, excluding that some specific company copies such originals as many as it requires for its own business It is prohibited to copy such originals as book, music, paintings, printed copy, maps, drawings, movie and pictures which are protected by the
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 10
    feeding (1 roll), cut sheet manual feeding, Paper Tray multiple cut sheet feeder (option). (4) A dedicated printer stand (option) offers easy print handling with the print basket. The KIP 700m is also suitable for your office layout as a desktop MFP. (5) The operation speed is 40mm/s (3 D landscape
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 11
    (Low power mode) Acoustic noise Ozone Dimensions Weight Environmental condition for usage Interface Rating input power Specification KIP 700m Desktop Console (with the stand) 1500W (Including Scanner & Controller Unit) 30W or less Idling Max. 51db Printing Max. 60db (impulse sound excluded
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 12
    1. 4. 2 Printer part Subject Printing method Photoreceptor Print speed Print head Resolution of print head Print width Print length Specification LED Array Electro photography Organic Photoconductive Drum 40mm per second (Inch) 1.7ppm/E 3 ppm/D Landscape LED Array 600dpi x 600dpi Maximum
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 13
    source Media Specification 1 Roll Deck (3" / 2" core roll) Manual Feeder (single cut sheet) Paper Tray (multiple cut sheet, option) (Recommended Paper : Transparent Paper (80g/m2) Film : 3.5MIL - 2" roll core : Universal Bond Storage of consumables (Cut sheet) Plain Paper / Bond (Toner
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 14
    edges 600dpi 200 / 300 / 400 / 600 dpi Sheet through type Max: 1.60mm Min : 0.05mm NOTE If the original is thicker than 0.65mm, its image quality is not guaranteed. Scanning speed 60mm per second (max) NOTE The above specifications are subject to change without notice. 1-8 Chapter 1 Before Use
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 15
    Unit. 8 Bypass Feeder Feed a cut sheet paper from the Bypass Feeder. 9 Roll Deck Cover Lift up to open the Roll Deck. A roll media can be loaded in the Roll Deck. Consult your sales dealer for optional media feed system. 10 Print Basket Receives ejected printed. 11 Stylus Use this to press
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 16
    6 Inlet Socket 7 Dehumidify Heater Switch (Option) Function Open here to access toner supply system. These trays catch the original ejected from the Scanner Unit. Connect the LAN Cable to connect the KIP 700m to the network. (Do not connect a telephone line) Service Use, 5VDC max. It is possible
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 17
    6mm Width 279.4mm to 914.4mm Length 210mm to 6,000mm (If an original is thicker than 0.65mm, its image quality is not guaranteed even it is transported.) Do not scan the following kinds of originals. The original or the scanner may damage. Sticked with paste Paste Torn Folded (Leading edge
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 18
    Not square Wet Metal or fabric material Rough surface (Carbon paper for example) Clipped or stapled KIP KIP Metal Wet Fabric KIP KIP Rough surface Clipped Stapled KIP KIP 1-12 Chapter 1 Before Use
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 19
    The following kinds of originals can be read with using a carrier sheet. Image quality or the reliability of paper feeding for them is not guaranteed. Patched Punched 1-13 Chapter 1 Before Use
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 20
    1. 7 Specifications for the Printing Paper 1. 7. 1 Papers not available to use Do not use the following kinds of printing paper. Doing so may damage the print engine. Excessively curled (a diameter of 50 mm or less) Folded Creased Torn Punched 1-14 Chapter 1 Before Use
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 21
    / low temperature & humidity) in a long period. Such papers may result in mis-feed, defective image or paper creasing. (8) It is recommended to trim the leading edge by using Initial Cut Key on the User Interface (UI) before making a long print. For trimming the leading edge, see [2.4 Initial Cut
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 22
    of paper" and other problems occurs when you print with plain paper and tracing paper. "Void of image" occurs when you print with tracing paper. "Void of image" occurs when you print with plain paper and tracing paper. "Void of image", "crease of paper" and other problems occurs when you print with
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 23
    Chapter 2 Basic Operation 2. 1 Turning on KIP 700m 2. 2 Turning off KIP 700m 2. 3 Replacing Roll Media 2. 4 Initial Cut 2. 5 Toner Supply 2. 6 Cut Sheet Media 2. 7 Copying 2. 8 Emergency Stop of Scan or Copy 2. 9 Canceling Sleep Mode 2. 10 Dehumidifying Roll Media 2-1 page 2- 2 2- 4 2- 5 2- 9 2-10
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 24
    and 15A In Europe : 220-240V plus 6% or minus 10%, 50/60Hz and 10A 2. Press " | " side the Power Switch on the right side of the printer to turn on the KIP 700m. Power Switch Press " | " side. 2-2 Chapter 2 Basic Operation
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 25
    up. Ready Indicator The UI screen may vary depending on your system configuration. (Shown with available options) 4. When Ready Indicator stops flashing, the KIP 700m is ready for operation. NOTE It is impossible to make any prints while Ready Indicator is flashing in orange. Please wait until it
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 26
    on the right side of KIP 700m. Press its " " side to turn off the KIP 700m. Power Switch Press " " side. CAUTION The KIP 700m print engine and UI appear to be shut down when you turn off KIP 700m. However, the controller PC embedded inside the KIP 700m is still operating and will shutdown in
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 27
    remove a roll media or an empty roll core (3). 2 3 1 2 2 3 2 2. Raise the green lever (4) on Flange (2). Remove both Flanges (2) from the roll core (3). 4 2 3 2 2 3. Move the right Slide Guide (5) to match your roll media's width. The right and left Slide
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 28
    sure not to touch them. 5. Push the green lever (4) down in either way. Position them flat against Flange to secure the roll media. 4 4 2-6 Chapter 2 Basic Operation
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 29
    (1) Be careful of the winding direction of the roll media. This direction (2) The outside rim of Flange (2) should fit into the groove on the Slide Guide. Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding. 2 groove 2 groove 2-7 Chapter 2 Basic
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 30
    edge will automatically go into the roll media's wait position. This is called "Auto Media Loading". 6 Reference Auto Media Loading becomes available while the printer is ready. 8. Trim the leading edge of the roll media with "Initial Cut" function if necessary. For Initial Cut, see the next page on
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 31
    Initial Cut is a function to trim the roll media with its leading edge cut off. (2) Initial Cut becomes available while the printer is ready. 1. Open the Manual Feeder Table (1). 1 2. Press the green button (2) on the right. 2 3. The leading edge of the roll media is automatically transported and
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 32
    several times to loosen the toner. 2 NOTE After you shake the Toner Bottle well, proceed the later step 3 and 4 as soon as possible. Having a pause after step 2 may reduce smoothness of the toner. This would disturb a smooth toner supply from the Toner Bottle to the printer. 2-10 Chapter 2 Basic
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 33
    3. Put the dent area (3) under the holder (4) to firmly seat the bottom plate of the Toner Bottle (2) to the toner supply position. 3 4 from right 2 4 from front 2-11 Chapter 2 Basic Operation
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 34
    . Remove the Toner Bottle. 5 from right NOTE It is impossible to remove the Toner Bottle unless the lever (5) completely moves to the original position. Do not attempt to remove the Toner Bottle by force if the lever is not at the original position. Doing so may damage toner supply system. 2-12
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 35
    avoided. "Curl up" sheets tend to result in a mis-feed. Correct: curl down Wrong: curl up (2) Setting a cut sheet to the Bypass Feeder while the printer is processing a print job cause a paper jam. 2-13 Chapter 2 Basic Operation
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 36
    face up. Then insert it under the Scanner Unit along with Original Guides. When the leading edge touches the original feeding roller, the machine automatically carries and sets the original at the proper position. 3. The KIP 700m will start the copy process. NOTE The scanner unit does not accept
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 37
    , press the Emergency Stop Button (1) on the Scanner Unit to immediately stop the original while making a copy or scan. 1 Pressing the button stops the current reading a document immediately. The current printing is stopped as well and is ejected. NOTE Do not pull back or hold down the original on
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 38
    has two Sleep Modes to reduce the power consumption. The KIP 700m will enter Sleep Mode after a certain period of inactivity. In the default setting; • Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply for Fuser Unit. • Cold Sleep Mode will start after
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 39
    3. 1. 6 J-1300 / 1400 Door Open while printing 3. 1. 7 Original Jam 3. 2 Other Operator Call Error 3. 2. 1 Roll Replacement 3. 2. 2 Toner Empty 3. 2. 3 Roll Deck Cover Open 3. 2. 4 Scanner Open 3. 2. 5 Printer Not Available 3. 3 Service Call Error page 3- 2 3- 3 3- 4 3- 5 3- 7 3- 9 3-12 3-14
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 40
    any). Please refer to the following figure to check the jam location. (Mis-feed Codes are described on the later pages.) Fuser Section J-0106 / 0206 Manual Feeder Section J-0203 Feed Section 2 J-0105 / 0205 Feed Section 1 J-0104 / 0204 Roll Deck Section J-0103 NOTE (1) Be careful not to get
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 41
    remain in the media path of the Roll Deck at a roll empty. The printer does not show any mis-feed error code against the portion. So please check for the portion in the media path through the square window (1) in the middle of the Roll Deck. If you can see a portion
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 42
    if the UI screen will show J-0203. J-0203 1. Pull out the mis-feed cut sheet from the Manual Feeder. NOTE The mis-feed cut sheet should be replaced with a new one if its leading edge has a torn or fold. Or it should be
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 43
    3. 1. 3 J-0104 / 0204 Media Feeder section 1 Remove a mis-feed media in the Media Feeder section 1 if the UI screen will show J-0104 or 0204. J-0104 or J-0204 1. Press down the blue levers (1) on both sides to unlock and open the Upper Unit. 1 1 2. Remove the mis-feed media. 3-5 Chapter 3 Error
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 44
    3. Put your hands on the rear rim of the scanner unit just as you hold the Upper Unit. Push the entire unit down to the arrow direction. Hold here Hold here 3-6 Chapter 3 Error Correction
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 45
    3. 1. 4 J-0105 / 0205 Media Feeder section 2 Remove a mis-feed media in the Media Feeder section 2 if the UI screen will show J-0105 or 0205. J-0105 or J-0205 1. Press down the blue levers (1) on both sides to unlock and open the Upper Unit. 1 1 2. Remove the mis-feed media. 3-7 Chapter 3
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 46
    3. Put your hands on the rear rim of the scanner unit just as you hold the Upper Unit. Push the entire unit down to the arrow direction. Hold here Hold here 3-8 Chapter 3 Error Correction
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 47
    if the trailing edge remains deep to be caught in the printer, do not pull it by force. Leave it there and go to the next step . 1 2 2 WARNING There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser Unit, or you will be burnt. Also the
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 48
    2. Close the Exit Cover (1). 3. Press down the blue levers (3) on both sides to unlock and open the Upper Unit. 3 3 4. Remove the mis-feed media. 3-10 Chapter 3 Error Correction
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 49
    5. Put your hands on the rear rim of the scanner unit just as you hold the Upper Unit. Push the entire unit down to the arrow direction. Hold here Hold here 3-11 Chapter 3 Error Correction
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 50
    the Exit Cover or the Upper Unit is open while the printer is processing a print job, the UI screen will show J-1300 (Exit Cover) / go to the next step. 1 2 2 WARNING There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser Unit, or you will be burnt. Also the mis
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 51
    4. Remove the mis-feed media. If the mis-feed media does not exist, close the Upper Unit. 5. Open the Roll Deck Cover. Rewind the roll onto the media core. 6. If the leading edge of the media has a torn / fold, trim the edge (cut it off) with "Initial Cut" function. 7. Close the Roll Deck Cover. 3-
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 52
    3. 1. 7 Original Jam If an original is mis-fed while scanning, the UI screen shows "Original Jam". Follow the instruction below to remove the mis-fed original. 1. On both sides, pull the levers (1) under the scanner cover to open the Scanner Unit until it locks. 1 1 2.
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 53
    Toner Empty When the printer is running out of toner, the UI Screen will display "Toner Empty" sign. For the toner supply procedure, see [2.5 Toner Supply]. screen shows "Printer Not Available". Please check that either Exit Cover or Upper Unit is firmly closed. If it seems no problem, turn off and
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 54
    TRAINED SERVICE PERSONNEL TO RESOLVE THE ERRORS. No operation KIP 700m, and turn it on after an interval of 30 seconds or more. 2. If the same error code appears, turn off KIP 700m, and then unplug the printer from the wall outlet after an interval of two minutes for shutdown. Call your service
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 55
    Chapter 4 Maintenance 4. 1 Cleaning 4. 1. 1 Scanner Unit 4. 1. 2 Touch Screen 4-1 page 4- 2 4- 2 4- 4 Chapter 4 Maintenance
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 56
    4. 1 Cleaning 4. 1. 1 Scanner Unit It is recommended to clean each Scan Glass, Feeding Rollers and Guide Plates as the scan/copy image may become defective if these parts are dirty. 1. Turn off KIP 700m. 2. Press the levers (1) up to unlock the Scanner Unit. Open the Scanner Unit. 1 1 3. Wipe
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 57
    4. Wipe the Feed Rollers (4: gray), Press Rollers (5: white) and the inside surface with a soft dry cloth. 5 4 4 5. Gently press Scanner Unit down and firmly close it. NOTE Press down Scanner Unit on both side to close it. Do not close it by pressing only one side down. 4-3 Chapter 4 Maintenance
  • Konica Minolta KIP 700 | KIP 700 User Manual - Page 58
    4. 1. 2 Touch Screen 1. Wipe the Touch Screen with a dry cloth. NOTE Do not use water, alcohol, organic solvent and glass cleaner for the cleaning. 4-4 Chapter 4 Maintenance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Version A1
KIP 7100 - User Manual