Konica Minolta KIP 700 KIP 700 User Manual - Page 41

J-0103, Roll Deck Open the Roll Deck Cover.

Get Konica Minolta KIP 700 PDF manuals and user guides View all Konica Minolta KIP 700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3. 1. 1 J-0103 Roll Deck section Remove a mis-feed media in the Roll Deck if the UI screen will show J-0103. J-0103 1. Open the Roll Deck Cover. Rewind the roll onto the media core. 2. If the leading edge of the media has a torn / fold, trim the edge (cut it off) with "Initial Cut" function. 3. Close the Roll Deck Cover. Reference If your roll media's end is not fixed to the core (by glue or a tape), a small portion of the media may remain in the media path of the Roll Deck at a roll empty. The printer does not show any mis-feed error code against the portion. So please check for the portion in the media path through the square window (1) in the middle of the Roll Deck. If you can see a portion, rotate the green roller (2) on the right to the arrow direction to remove it. 2 1 3-3 Chapter 3 Error Correction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Chapter 3
Error Correction
3-3
3. 1. 1
J-0103
Roll Deck section
Remove a mis-feed media in the Roll Deck if the UI screen will show J-0103.
1. Open the Roll Deck Cover.
Rewind the roll onto the media core.
2. If the leading edge of the media has a torn / fold,
trim the edge (cut it off) with “Initial Cut” function.
3. Close the Roll Deck Cover.
Reference
If your roll media’s end is not fixed to the core (by glue or a tape), a small portion of the
media may remain in the media path of the Roll Deck at a roll empty. The printer does not
show any mis-feed error code against the portion.
So please check for the portion in the media path through the square window (1) in the
middle of the Roll Deck. If you can see a portion, rotate the green roller (2) on the right to the
arrow direction to remove it.
J-0103
1
2