Konica Minolta MS7000 MK II MS7000 MKII User Manual - Page 35
Control Panel 1 (Shift Function), When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H
View all Konica Minolta MS7000 MK II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3 Control Panel 1 (Shift Function) Scanner 1 2 3 4 5 6 1 Job Recall Key When this key is pressed together with the Shift Key, the program registration locations (1J, 2J and 3J) are called. Each time this key is pressed while the Shift Key is held down, the display is switched in order of 1J → 2J → 3J. 2 Resolution Key When this key is pressed together with the Shift Key, the resolution of the Scanner is set. When the Scanner is connected to the Printer: 4H and 6H When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H * 4H represents 400dpi and 6H represents 600dpi. 3 User Mode Key Pressing this key together with the Shift Key enters the unit into the User Mode. See p. 5-4 User Mode. 4 Zoom Key When this key is pressed together with the Shift Key, the electrical zoom magnification is set. Zoom+: When this key is pressed together with the Shift Key, the magnification is increased by an increment of 0.01X (up to 2.00X). Zoom clr: When this key is held down together with the Shift Key for one second, the standard magnification is resumed. Zoom-: When this key is pressed together with the Shift Key, the magnification is decreased by a decrement of 0.01X (down to 0.50X). 5 PC/PR Key When this key is pressed together with the Shift Key, the connection to the PC or to the Printer is selected. 6 Shift Key Executes an expansion function when being pressed together with the intended function key. 3-9