Konica Minolta bizhub 20P bizhub 20P Quick Guide - Page 21

For Network Users BRAdmin Light utility (For Mac OS X users) The BRAdmin Light is a utility for initial setup of KONICA MINOLTA network connected devices. It can also search for KONICA MINOLTA products on your network, view the status and configure basic network settings, such as IP Address from a computer running Mac OS X 10.3.9 or greater. The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already installed the printer driver, you don't have to install it again. Set your IP Address, Subnet Mask and Gateway using BRAdmin Light c Double click the file BRAdmin Light.jar and run the software. BRAdmin Light will then search for new devices automatically. Note • If you have a DHCP/BOOTP/RARP server in your network, you don't have to do the following operation. The print server will automatically obtain its own IP Address. • Make sure that version 1.4.2 or later of Java client software is installed on your computer. • The default password for the print server is 'access'. You can use BRAdmin Light to change this password. d Double-click the unconfigured device. a Double-click the Macintosh HD icon on your desktop. b Choose Library, Printers, KONICA MINOLTA and then Utilities. e Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK. f The address information will be saved to the printer. 21