Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub 283 » Manual Viewer

Konica Minolta bizhub 283 bizhub 223/283/363/423 Security Operations User Guid - Page 63

Changing the Administrator Password

View all Konica Minolta bizhub 283 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

2.11 Changing the Administrator Password 2 2.11 Changing the Administrator Password When access to the machine by the Administrator of the machine through the Administrator Settings from the control panel is authenticated, the machine enables the operation of changing the Administrator Password required for accessing the Administrator Settings. The Administrator Password entered for the authentication purpose appears as "*" on the display. Changing the Administrator Password 0 For the procedure to call the Security Settings screen on the display, see steps 1 and 2 of page 2-10. 0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings. 1 Call the Security Settings screen on the display from the control panel. 2 Touch [Administrator Password]. 3 Enter the currently set 8-digit Administrator Password from the keyboard or keypad. % Press the [C] key to clear all characters. % Touch [Delete] to delete the last character entered. % Touch [Shift] to show the upper case/symbol screen. % Touch [Cancel] to go back to the Security Settings screen. 4 Touch [OK]. % If a wrong Administrator Password is entered, a message that tells that the Administrator Password does not match appears. Enter the correct Administrator Password. % If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong Administrator Password is entered a predetermined number of times (once to three times) or more set by the Administrator of the machine, the Utility screen appears and the machine is set into an access lock state. To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power bizhub 423/363/283/223 2-48

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
Compliance with the ISO15408 Standard	6
Operating Precautions	6
INSTALLATION CHECKLIST	7
1.2 Security Functions	8
Check Count Clear Conditions	8
1.3 Data to be Protected	9
1.4 Precautions for Operation Control	10
Roles and Requirements of the Administrator	10
Password Usage Requirements	10
Network Connection Requirements for the Machine	11
User information control server control requirements	11
Security function operation setting operating requirements	11
Operation and control of the machine	11
Machine Maintenance Control	11
1.5 Miscellaneous	12
Password Rules	12
Precautions for Use of Various Types of Applications	12
Encrypting communications	13
IPP printing	13
Items of Data Cleared by Overwrite All Data Function	14
Fax functions	15
Bluetooth communication	15
2 Administrator Operations	17
2.1 Accessing the Administrator Settings	17
2.1.1 Accessing the Administrator Settings	17
2.1.2 Accessing the User Mode	19
2.2 Enhancing the Security Function	23
2.2.1 Items cleared by HDD Format	25
2.2.2 Setting the Enhanced Security Mode	25
2.3 Preventing Unauthorized Access	28
Setting Prohibited Functions When Authentication Error	28
2.4 Canceling the Operation Prohibited State	30
Performing Release Setting	30
2.5 Setting the Authentication Method	32
2.5.1 Setting the Authentication Method	32
2.5.2 Setting the External Server	34
2.6 ID & Print Setting Function	36
Setting ID & Print	36
2.7 System Auto Reset Function	38
Setting the System Auto Reset function	38
2.8 User Setting Function	40
Making user setting	40
2.9 Account Track Setting Function	46
Making account setting	46
2.10 User Box Function	51
2.10.1 Setting the User Box	51
2.10.2 Changing the user attributes and account attributes	57
2.11 Changing the Administrator Password	63
Changing the Administrator Password	63
2.12 Protecting Data in the HDD	65
2.12.1 Setting the Encryption Key (encryption word)	65
2.12.2 Changing the Encryption Key	71
2.13 Overwrite All Data Function	73
Setting the Overwrite All Data function	73
2.14 SSL Setting Function	75
2.14.1 Device Certificate Setting	75
2.14.2 SSL Setting	77
2.14.3 Removing a Certificate	78
2.15 S/MIME Communication Setting Function	79
2.15.1 Setting the S/MIME Communication	79
2.15.2 Registering the certificate	83
2.16 SNMP Setting Function	85
2.16.1 Changing the auth-password and priv-password	85
2.16.2 SNMP access authentication function	92
2.16.3 SNMP v3 setting function	92
2.16.4 SNMP network setting function	93
2.17 WebDAV Function	94
Setting the WebDAV Server Password	94
2.18 PC-Fax RX Setting Function	98
PC-Fax RX Setting	98
2.19 TSI User Box Setting Function	101
TSI User Box Setting	101
2.20 TCP/IP Setting Function	105
2.20.1 Setting the IP Address	105
2.20.2 Registering the DNS Server	106
2.21 NetWare Setting Function	107
Making the NetWare Setting	107
2.22 SMB Setting Function	108
Setting the NetBIOS Name	108
2.23 AppleTalk Setting Function	109
Making the AppleTalk Setting	109
2.24 E-Mail Setting Function	110
Setting the SMTP Server (E-Mail Server)	110
3 User Operations	112
3.1 User Authentication Function	112
3.1.1 Performing user authentication	112
3.1.2 Accessing the ID & Print Document	120
3.2 Change Password Function	122
Performing Change Password	122
3.3 Secure Print Function	125
Accessing the Secure Print Document	125
3.4 User Box Function	128
3.4.1 Setting the User Box	128
3.4.2 Changing the User Box Password and user attributes and account attributes	134
3.4.3 Accessing the User Box and User Box file	142
3.4.4 Sending S/MIME box files	146
4 Application Software	149
4.1 PageScope Data Administrator	149
4.1.1 Accessing from PageScope Data Administrator	149
4.1.2 Setting the user authentication method	152
4.1.3 Changing the authentication mode	154
4.1.4 Making the user settings	157
4.1.5 Making the account settings	158
4.1.6 Registering the certificate	159
4.1.7 SNMP Setting Function	161
4.1.8 DNS Server Setting Function	163
4.1.9 NetWare Setting Function	164
4.1.10 SMB Setting Function	165
4.1.11 AppleTalk Setting Function	166
4.1.12 E-Mail Setting Function	167
4.2 PageScope Box Operator	168
4.2.1 Accessing the User Box	168
4.2.2 Creating a User Box	170
4.2.3 Changing the User Box properties (user attributes, account attributes)	171
4.2.4 Accessing the User Box file	173
4.3 HDD TWAIN driver	174
Accessing from the HDD TWAIN driver	174
4.4 PageScope Direct Print	176
Printing through PageScope Direct Print	176
4.5 HDD Backup Utility	178
4.5.1 Backup	178

Match case Limit results 1 per page

bizhub 423/363/283/223

2-48

2.11

Changing the Administrator Password

2.11

Changing the Administrator Password

When access to the machine by the Administrator of the machine through the Administrator Settings from

the control panel is authenticated, the machine enables the operation of changing the Administrator Pass-

word required for accessing the Administrator Settings.

The Administrator Password entered for the authentication purpose appears as "*" on the display.

Changing the Administrator Password

For the procedure to call the Security Settings screen on the display, see steps 1 and 2 of page 2-10.

Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If

it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.

Call the Security Settings screen on the display from the control panel.

Touch [Administrator Password].

Enter the currently set 8-digit Administrator Password from the keyboard or keypad.

Press the [C] key to clear all characters.

Touch [Delete] to delete the last character entered.

Touch [Shift] to show the upper case/symbol screen.

Touch [Cancel] to go back to the Security Settings screen.

Touch [OK].

If a wrong Administrator Password is entered, a message that tells that the Administrator Password

does not match appears. Enter the correct Administrator Password.

If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized

access. If a wrong Administrator Password is entered a predetermined number of times (once to

three times) or more set by the Administrator of the machine, the Utility screen appears and the ma-

chine is set into an access lock state. To cancel the access lock state, settings must be made by

the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the

main power switch is turned off and on, the access lock state is canceled after the lapse of time set

for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least

10 seconds to turn it on after turning it off. If there is no wait period between turning the main power