Konica Minolta bizhub 360i bizhub 360i/300i Quick Guide - Page 16
Name of each component main unit
View all Konica Minolta bizhub 360i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4.2 4 Name of each component (main unit) Front This figure shows the main unit equipped with Reverse Automatic Document Feeder DF-714. 23 4 1 5 6 7 17 16 15 14 8 9 10 11 12 13 No. Name Description 1 Reverse Automatic Automatically feeds and scans originals by page. This unit scans a 2- Document Feeder sided original by only requiring the paper be fed into the machine once without reversing. This unit is referred to as ADF in the manual. 2 Left Cover Release Used to open the Left Cover. Lever 3 Left Cover Open the Left Cover when clearing a paper jam. 4 Lateral Guide Adjust this guide along the width of the original. 5 Original Tray Load the original face up in this tray. 6 Original Output Tray The scanned original is fed out onto this tray. 7 Control Panel Used to configure various settings in this machine. 8 Stylus Pen Used to select a menu on the Touch Panel, or enter characters. 9 USB Port (Type A) Used to connect a USB flash drive to this machine. USB2.0/1.1 10 Right Door Open this door to clear a paper jam. 11 Bypass Tray Used to print data on irregularly size paper, thick paper, transparencies, postcards (4 e 6 (A6 Card)), envelopes, or label sheets. 12 Right Door Release Used to lock the Right Door. Lever 13 Main Power Switch Press this switch to turn the machine on or off. 14 Tray 1, Tray 2 Allows you to load up to 500 sheets of plain paper. 15 Front Door Open this door to replace the Toner Cartridge or Waste Toner Box, and to clean the Print Head Glass. 16 Mobile Touch Area This area is used to associate this machine with an NFC-compatible Android terminal or an iOS terminal compatible with Bluetooth LE. 17 Power key Switches this machine to the Power Save mode. bizhub 360i/300i 15