Konica Minolta bizhub 361 bizhub 361/421/501 Enlarge Display Operations User M - Page 65
Specify the necessary scanning settings., Press the [Start] key.
View all Konica Minolta bizhub 361 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Using fax/scanning functions 3 - To erase the entered destination, press the [C] (clear) key. 4 Specify the necessary scanning settings. - For details on specifying scanning settings, refer to page 3-14. - To cancel the setting and select the default, press the [Reset] key. 5 Press the [Start] key. - If the machine is set to display the transmission result report screen, a screen appears, requesting confirmation to print the transmission result report. To print the transmission result report, touch [Yes], and then touch [OK]. - To stop the transmission, press the [Stop] key. - Pressing the [Stop] key during scanning temporarily stops the scan operation. Scanning of the original begins, and then the fax is sent. ! Detail If the "Destination Check Display Function" parameter was set to "ON", the Destination Settings screen appears. Check the destinations, and then touch [Send]. If the machine is set to print the transmission result report, the transmission result report is printed if the transmission could not be completed. 501/421/361 3-3