Konica Minolta bizhub 4000i bizhub 5000i/4000i User Guide - Page 67
Devices and Printers, Hardware and Sound
View all Konica Minolta bizhub 4000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Click (Start) > Devices and Printers > Add a device. • (Windows 8.1) Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device. • (Windows 10) Click > Windows System > Control Panel. In the Hardware and Sound group, click Add a device. • To use a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, you must register it to your network in advance. For more information, see the instructions supplied with your wireless LAN access point/router. • If you use Windows 7, Windows 8.1, or Windows 10 as a Registrar, you can install the printer driver after the wireless configuration by following the on-screen instructions. 9. Select your machine and click Next. 10. Type the PIN displayed on the machine's LCD, and then click Next. 11. Select your network, and then click Next. 12. Click Close. If your wireless device is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i 1. Press [Settings] > [Network] > [WLAN] > [WPS w/PIN Code]. 2. When [Switch network interface to wireless?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router. 4. Using a computer that is on the network, type "http://access point's IP address" in your browser (where "access point's IP address" is the IP address of the device that is being used as the Registrar). 5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, complete the following steps: 6. Do one of the following: • (Windows 7) Click (Start) > Devices and Printers > Add a device. • (Windows 8.1) Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device. • (Windows 10) Click > Windows System > Control Panel. In the Hardware and Sound group, click Add a device. • To use a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, you must register it to your network in advance. For more information, see the instructions supplied with your wireless LAN access point/router. • If you use Windows 7, Windows 8.1, or Windows 10 as a Registrar, you can install the printer driver after the wireless configuration by following the on-screen instructions. 7. Select your machine and click Next. 63