Konica Minolta bizhub 751 bizhub 751/601 Network Administrator User Manual - Page 101

SNMP Setting

Page 101 highlights

Setup items by operation 1 1.30.3 SNMP Setting In Administrator mode of PageScope Web Connection, select the Network tab - "SNMP Setting". Specify the following settings. Item SNMP UDP Port Setting SNMP v1/v2c Setting Read Community Name Write Community Name SNMP v3 Setting Context Name Discovery User Name Read User Name Security Level auth-password Definition Specifies whether to use the SNMP. If yes, specify whether to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX). SNMP v1 (IPX) can be specified only when IPX is enabled. Default setting: 161 Specify the UDP port number. Specify settings for using SNMP v1/v2c. Specify the community name to be used for scanning (up to 15 characters). Specify the community name to be used for reading and writing (up to 15 characters). Specify settings for SNMP v3. Specify the context name (up to 63 characters). Specify the user name for detection (up to 32 characters). Specify the name of read only user (up to 32 characters). Specify the security level for read only user. Specify the read only user authentication password to be used for authentication (up to 32 characters). Prior confirmation Protocol to be used (TCP/IP or IPX/SPX) 751/601 1-88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233

751/601
1-88
Setup items by operation
1
1.30.3
SNMP Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "SNMP Setting".
Specify the following settings.
Item
Definition
Prior confirmation
SNMP
Specifies whether to use the SNMP. If yes, specify whether
to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Protocol to be used
(TCP/IP or IPX/SPX)
UDP Port Setting
Default setting: 161
Specify the UDP port number.
SNMP v1/v2c Setting
Specify settings for using SNMP v1/v2c.
Read Community Name
Specify the community name to be used for scanning (up to
15 characters).
Write Community Name
Specify the community name to be used for reading and
writing (up to 15 characters).
SNMP v3 Setting
Specify settings for SNMP v3.
Context Name
Specify the context name (up to 63 characters).
Discovery User Name
Specify the user name for detection (up to 32 characters).
Read User Name
Specify the name of read only user (up to 32 characters).
Security Level
Specify the security level for read only user.
auth-password
Specify the read only user authentication password to be
used for authentication (up to 32 characters).