Home » Konica Minolta Manuals » Printers » Konica Minolta bizhub C3110 » Manual Viewer

Konica Minolta bizhub C3110 bizhub C3110 Maintenance/Troubleshooting User Guid - Page 37

Select [UTILITY] - [Admin Settings] - [System Settings] - [Expert Adjustment] - [Life] - [REPLACE]

View all Konica Minolta bizhub C3110 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

2.2 Replacing consumables 2 16 Install all of Toner Cartridge, Waste Toner Bottle, and Imaging Unit. CAUTION Do not touch the copper terminals of the Toner Cartridge and Imaging Unit. Doing so may cause static electricity to damage the product. % For information on how to install a Toner Cartridge, refer to page 2-3. % For information on how to install a Waste Toner Bottle, refer to page 2-13. % For information on how to install an Imaging Unit, refer to page 2-8. 17 Close the Front Door. 18 Connect the power cable, then turn the power of this machine on. 19 Select [UTILITY] - [Admin Settings] - [System Settings] - [Expert Adjustment] - [Life] - [REPLACE] - [TRANS. BELT], then reset the counter. [Maintenance/Troubleshooting] 2-22

Section	Page
Table of contents	2
1 Cleaning this Machine	5
1.1 Before getting started	5
1.2 Cleaning	7
1.2.1 Cleaning the outside of this machine	7
Control Panel	7
Exhaust Air Duct	7
Outer Covers	7
Original Glass	8
Original Cover Pad	8
1.2.2 Cleaning the Paper Feed Rollers	9
Cleaning the Paper Feed Rollers of the Manual Feed Tray	9
Cleaning the Paper Feed Rollers of Tray 1/2	10
Cleaning the Transport Roller of Tray 2	10
Cleaning the Paper Feed Roller of the ADF	11
1.2.3 Cleaning the Laser Lenses	12
2 Checking and Replacing Consumables	17
2.1 Checking the status of consumables	17
Consumables replacement messages	17
Checking the consumable level	17
2.2 Replacing consumables	18
2.2.1 Replacing a Toner Cartridge	18
Handling a Toner Cartridge	18
Storing Toner Cartridges	18
Replacement procedure	19
2.2.2 Replacing an Imaging Unit	23
2.2.3 Replacing a Waste Toner Bottle	28
2.2.4 Replacing the Transfer Roller	30
2.2.5 Replacing the Transfer Belt Unit	32
2.2.6 Replacing a Fuser Unit	38
3 Clearing a Paper Jam	43
3.1 To prevent a paper jam	43
3.2 When a paper jam has occurred	44
3.2.1 Paper jam message screen	44
3.2.2 Clearing a paper jam in the Manual Feed Tray or Transfer Roller	44
Clear procedure	45
3.2.3 Clearing a paper jam in Tray 1	46
Clear procedure	46
3.2.4 Clearing a paper jam in Tray 2	48
3.2.5 Clearing a paper jam in ADF	49
3.2.6 Clearing a paper jam in the Duplex Option	52
3.2.7 Clearing a paper jam in the Fuser Unit	53
Clear procedure	53
3.3 Troubleshooting for paper jam	57
4 Troubleshooting	60
4.1 The power is not turned on	60
4.2 When the Message Window is not displayed	60
4.3 Cannot print	61
4.3.1 Cannot print	61
4.3.2 Problems on print quality	64
4.3.3 When the bit count does not match between the server and the client	66
4.4 Cannot perform network scanning	67
4.5 Cannot send a fax	68
4.5.1 Cannot send a fax	68
4.5.2 Cannot perform Fax RX	69
4.6 Cannot perform copy	70
4.7 Major messages and actions	72
Warning messages	72
Error messages	73
Service call	75
5 Checking Counters	77
5.1 Checking the counter	77