Konica Minolta bizhub C35 bizhub C35 Facsimile User Guide - Page 124
Symptom, Cause, Solution, F-Code TX] set to [Yes].
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Symptom Cause Solution Transmission is not pos- The transmission proce- Check the transmission sible. dure may have been procedure, and then try performed incorrectly. sending the fax again. The fax number may be Check the fax number. wrong. The address book desti- Check that the destinanation, group destination tions were correctly regor program destination istered. may have been registered incorrectly. The telephone line may Check the telephone line be incorrectly con- connection. If it is dis- nected. connected, connect it. There may be a problem Contact the recipient. with the recipient's fax machine (such as, no paper or turned off). An incorrect telephone line setting may have been selected. Check that the dialing method setting selected from the [Comm. Settings] screen matches the telephone line being used. An incorrect password may have been specified when the transmission was sent with [Password TX] set to [Yes]. Check the password at the receiving end, and then try sending the fax again with the correct password. An incorrect password Check the password at may have been speci- the receiving end, and fied when the transmis- then try sending the fax sion was sent with again with the correct [F-Code TX] set to [Yes]. password. The recipient's fax num- Have the recipient check ber may have been that their fax number is incorrectly specified on correctly specified on their fax machine when their machine. the transmission was sent with [TX Confirm CSI] set to [Yes]. Problems when sending faxes 8-3