Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Utility Keys User Gui - Page 37

5.1 [System Settings] 5 Settings [Paper Separation Adjustment] [Main Scan Direction Zoom Adjustment] [Main Scan Direction Zoom Adjustment Confirmation Printing] [List Output] [Halftone 64] [Halftone 128] [Halftone 256] [Gradation] [Life] [New Release] [User Paper Settings] [Problem Unit Isolation Set.] Description Adjust the paper separation position on each side of paper for 2-sided printing. • [Front]: Adjust the balance of the paper separation or image transfer per- formance when a paper jam or image failure occurs on the front side for 1sided or 2-sided printing due to high ambient temperature and humidity. • [Back]: Adjust the balance of the paper separation or image transfer performance when a paper jam or image failure occurs on the back side for 2sided printing due to high ambient temperature and humidity. Increase the value if paper jams are occurring, and decrease it if the image is transferred unevenly. [0.0 mm] is specified by default. Adjust the zoom ratio in the main scanning direction for each color. [0] is specified by default. Print a test pattern to adjust the zoom ratio in the main scanning direction. Print halftone patterns. Print a halftone pattern of density 25% for each color. Print a halftone pattern of density 50% for each color. Print a halftone pattern of density 100% for each color. Print a gradation pattern. Configure a setting to replace consumables. Reset the counter value after replacing the fusing unit, transfer belt unit, transfer roller unit, and toner filter. Register special paper with [User1] to [User5]. • [Media Adjustment]: Select Front Side/Back Side or Color/Black to make adjustments when an error has occurred on a print image of the user paper. • [Basic Weight]: Specify the weight of the user paper. The following shows the default settings. [User1]/[User2]: [77] [User3]: [105] [User4]: [139] [User5]: [183] • [Test Pattern Output]: Prints test patterns on the selected user paper. Temporarily isolates the finisher to continue the use of the device, which cannot be continued due to a finisher failure. • [Finisher]: Select whether or not to isolate the finisher. [OFF] is specified by default. Note This function is only available when bizhub C3850FS is used. [List/Counter] To display: [Utility] - [Administrator Settings] - [System Settings] - [List/Counter] Prints the job setting list of this machine and configure the paper count. Settings [Management List] [Activity Report] [User Account Counter List Page] [Scan TX Report] Description Prints a list of settings for [User Settings] and [Administrator Settings] among others. Print a report that contains sending and receiving records. Print a report that contains counter information. Prints a report that contains scan sending records. [Description of Utility Keys] 5-6