Konica Minolta bizhub C652 bizhub C452/C552/C652/C552DS/C652DS Security Operat - Page 114
User Authentication Function, Login Method, Description
View all Konica Minolta bizhub C652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
3.1 User Authentication Function 3 4 Touch [Password]. 5 Enter the 8-to-64-digit User Password from the keyboard or keypad. % Press the [C] key to clear all characters. % Touch [Delete] to delete the last character entered. % Touch [Shift] to show the upper case/symbol screen. % Touch [Cancel] to go back to the screen shown in step 4. 6 Touch [OK]. 7 Press [Access] or touch [Login]. If a document is stored in the ID & Print User Box, select the desired login method. Login Method Description [Begin Printing] Prints only the ID & Print Document of the corresponding user. The user operation mode screen is not called to the screen. [Print & Login] The user operation mode screen is called to the screen after the ID & Print Document of the corresponding user is printed. [Access] or [Login] If [Access] or [Login] is selected, only the ordinary login procedure is applicable and no ID & Print Documents are printed. % If a wrong User Name is entered, a message appears that tells that authentication has not been successful. The machine then prohibits entry for User Authentication for 5 sec. and then causes the screen of step 1 to reappear. Perform User Authentication once again. % If there is a mismatch of User Password relative to the registered User Name, a message appears that tells that authentication has not been successful. The machine then prohibits entry of User Name and User Password for 5 sec. and then causes the screen of step 4 to reappear. Enter the correct User Password. % If the Enhanced Security Mode is set to [ON], the entry of a wrong User Password is counted as unauthorized access. If a wrong User Password for the corresponding User Name entered is entered a predetermined number of times (once to three times) or more set by the Administrator of the machine, a message appears that tells that authentication has not been successful for any subsequent operation for authentication. The machine is then set into an access lock state, rejecting any more logon attempts. To cancel the access lock state, the Administrator of the machine must perform the Release Setting. Contact the Administrator of the machine. bizhub C652/C652DS/C552/C552DS/C452 3-4