Konica Minolta bizhub C652 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 108
Non-Image Area Erase - bizhub c652ds toner
View all Konica Minolta bizhub C652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5.4 Application 5 Non-Image Area Erase This function enables copying with the ADF open while having an original that cannot be loaded in the ADF placed at a desired position on the original glass. The original is automatically detected and the area outside the original text is erased. Erase methods include "Bevel" and "Rectangular". "Bevel" is used when the background of the original is thin and "Rectangular" is used when it is dark. You can place the original on any position without opening or closing the ADF so that you can make copies promptly. In addition, toner consumption will be reduced as the area outside the original text is erased. Rectangular erasing Bevel erasing 0 If erasing is not performed as desired, set "Erase Operation" under "Erase Adjustment" in Administrator Settings. 0 The size of the original automatically detected is 3/8 inch e 3/8 inch (10 mm e 10 mm) or larger. If the detection fails, a blank sheet of paper is output. 0 You cannot make copies with the ADF closed. 0 The original image may be defected at its top or end. % Press [Application] ö [Erase] ö [Non-Image Area Erase]. d Reference To set Erase Operation: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Erase Adjustment]. bizhub C652/C652DS/C552/C552DS/C452 5-42