Konica Minolta bizhub C652 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 77
When the Saddle Stitcher SD-508 is installed on the Finisher FS-526
View all Konica Minolta bizhub C652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
5.1 Basic Settings Offset Yes/No 5 Specify whether to separate each set of copies from another set in the output tray when copying multiple sets of multi-page originals. When the Finisher or Job Separator JS-504 is not installed: If the following conditions are met, printed copies are fed out and sorted in an alternating crisscross pattern. • 8-1/2 e 11, A4 or B5 paper is used • Paper of the same size and type is loaded with the w orientation in one pa- per tray and with the v orientation in another tray • Auto paper selection is specified for the paper size setting When the Finisher or Job Separator JS-504 is installed: The copies are fed out and stacked on top of each other with each set shifted to separate it. Fold/Bind Staple Punch When the Saddle Stitcher SD-508 is installed on the Finisher FS-526: Half Fold Center Staple & Fold Tri-Fold Z-Fold To configure the Z folding setting, install the Z Folding Unit ZU-606. When the Saddle Stitcher SD-509 is installed on the Finisher FS-527: Half Fold Center Staple & Fold Staples copies in corner or at two points before they are output. Punches holes in copies before they are output. 1 bizhub C652/C652DS/C552/C552DS/C452 5-11