Konica Minolta bizhub C652 bizhub C452/C552/C552DS/C652/C652DS Print Operation - Page 153
While [Current Jobs] is displayed, press [Release Held Job].
View all Konica Minolta bizhub C652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
12.1 Proof Print 12 2 While [Current Jobs] is displayed, press [Release Held Job]. The Release Held Jobs screen appears. 3 From the job list, select the job you want to print. % To print the remaining number of copies, continue with Step 6. % To change the printing conditions, continue with Step 4. % If the job you want to release is not displayed, press [ ] or [ ] until the desired job is displayed. If an incorrect job was selected, touch the button for the selected job again to deselect it. 4 Press [Change Settings]. The Change Settings screen appears. % To check the results of setting changes, select the job whose sample copy is to be printed from the job list, and then press the [Proof Copy] key on the control panel. One copy is printed for checking. After performing the [Proof Copy] key, the original settings are restored. Configure the settings again as necessary. 5 Change the printing conditions in the Change Settings screen, and then press [OK]. The Release Held Jobs screen appears again. % To cancel releasing the held job, press [Cancel]. 6 Press [OK] or the [Start] key in the control panel. The stored job is changed to an active job, and then printed. bizhub C652/C652DS/C552/C552DS/C452 12-4