Konica Minolta bizhub C652 bizhub C452/C552/C552DS/C652/C652DS Box Operations - Page 289
Error message list
View all Konica Minolta bizhub C652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
10.1 Error message list 10 10 Appendix 10.1 Error message list If an error message appears, perform the corresponding operation described below. Message Unable to connect to the network. The address for the communication method cannot be selected since the number of addresses has exceeded the maximum allowed for broadcasting. Document could not be saved in user box due to insufficient HDD capacity. Check log The number of registered user boxes has reached the maximum allowed. The number of documents saved in the User Box has reached its maximum The number of programmed job has reached the max. allowance. Wait until a programmed job is completed. Cause and remedy Make sure that the network cable is correctly connected. In addition, make sure that "Network Settings" in "Administrator Settings" have been correctly configured. The number of destinations specified exceeds the number possible for a broadcast transmission. Reduce the number of broadcast destinations, or send the transmission in multiple batches. The hard disk is full. Delete unnecessary data, and then try saving the data again. The number of User Boxes that can be registered has reached the maximum number possible. Delete unnecessary User Boxes, and then try registering new boxes again. The number of documents that can be saved in a User Box has reached the maximum number possible. Delete unnecessary documents, and then try saving the document again. The number of jobs that can be programmed has reached the maximum number possible. Wait until a job has been completed, or delete a current job. d Reference For details on the network settings, refer to "User's Guide [Network Administrator]". bizhub C652/C652DS/C552/C552DS/C452 10-2