Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 165
Saddle Stitcher Adjustment] - [Fore-edge Trimming Adjustment]
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
5 5.9 [Saddle Stitcher Adjustment] - [Fore-edge Trimming Adjustment] 5.9 [Saddle Stitcher Adjustment] - [Fore-edge Trimming Adjustment] Adjust the fore-edge trimming width determined by Saddle Stitcher SD-513. The trimming width should be 5 mm or more, otherwise the trimming operation may not performed properly. Objects of adjustment: Full Area (Offset for All Size), 11 e 17 w, A3 w, B4 w, 8.5 e 14 w, A4 w, 8.5 e 11 w, B5 w, 8 e 13 w, 8.125 e 13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8K w, 16K w, 12 e 18 w, A3W w, B4W w, A4W w, B5W w, 12 e 18W w, 11 e 17W w, 8.5 e 11W w, Custom, SRA3 w, SRA4 w NOTICE With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific paper size selected, the trimming width will be the sum of the entered value and the value previously specified for [Full Area] ([Offset for All Size]). 1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 2 Display the Trimming Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjustment], and [08 Fore-edge Trimming Adjustment] in sequence. % In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [08 Fore-edge Trimming Adj.] in sequence. % In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [08 Fore-edge Trimming Adj.] in sequence. 3 Select the size to be adjusted using [+] or [,] to scroll. 4 Press [Print Mode]. 5 Load the paper size selected in step 3 into the tray, then select that tray key. 6 Press Start on the control panel. A sample pattern will be output. 7 Check the trimming width (a) of the output sheets. Allowance: a = 5 mm or more 8 Exit the print mode to return to the Fore-edge Trimming Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 5-36 Saddle Stitcher SD-513