Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 169
Saddle Stitcher Adjustment] - [2-Side Slitting Adjustment]
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
5 5.11 [Saddle Stitcher Adjustment] - [2-Side Slitting Adjustment] 5.11 [Saddle Stitcher Adjustment] - [2-Side Slitting Adjustment] Adjust the 2-side slitting width determined by Trimmer Unit TU-503 mounted on Saddle Stitcher SD-513. Objects of adjustment: Front, Rear 1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 2 Display the 2-Side Slitting Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjustment], and [10 2-Side Slitting Adjustment] in sequence. % In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [10 2-Side Slitting Adjustment] in sequence. % In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [10 2-Side Slitting Adjustment] in sequence. 3 Select [Front] or [Rear], then press [Print Mode]. 4 Load 11 e 17 (A3) w paper into a tray, then select that tray key. 5 Press Start on the control panel. A sample pattern will be output. 6 Measure the length (a) of the output sheet and check the misalignment against the set value. Allowance: set value - a = within ^ 0.5 mm [1] Slit side 7 Exit the print mode to return to the 2-Side Slitting Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 5-40 Saddle Stitcher SD-513