Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 76

5.2 Image Quality Adjustment Adjustment order 4-a 4-b 5 Menu item Description Reference Color Density Control (with Relay Unit RU-509 mounted) Calibration by image controller (without Relay Unit RU-509 mounted) Exact Color Basic Setting Configure a setting so that this machine executes calibration automatically at periodic intervals. Color Density Manual Control Executes calibration at any timing in addition to the periodic adjustment. Each Paper Type Color Adj. Adjusts the sensor sensitivity to fit the paper. This function is available when using colored paper or enhancing the sensor accuracy. On the [MACHINE] screen, select [Adjustment] - [Color Density Control] - [Each Paper Type Color Adj.] to adjust the sensitivity. Executes calibration using Color Centro. Executes calibration for color mixture. This function can be used to improve the gray balance. p. 5-15 p. 5-18 HTML User's Guide p. 5-21 HTML User's Guide Carry out the adjustment continuously in sequence. If you have interrupted the adjustment, select "2. Gamma Automatic Adj." to execute automatic gamma adjustment each time before restarting calibration. For example, if you have interrupted the adjustment at the end of the "3. Density Balance Adjustment" processing, select "2. Gamma Automatic Adj." - "4-a. Color Density Control (with Relay Unit RU-509 mounted)" or "4-b. Calibration by image controller (without Relay Unit RU-509 mounted)" to restart the adjustment. If sufficient adjustment results are not obtained via daily maintenance, also carry out the adjustment in this order. For details about the setting procedure, refer to the HTML User's Guide. NOTICE If the setting value is changed in the [Custom Screen], hue may fluctuate significantly. To manage the hue fluctuation, specify the standard image quality following the procedure if you changed the setting value. 5-27