Konica Minolta magicolor 3730DN magicolor 3730DN User Guide - Page 49

Driver Thick 1 (91-150 g/m2) Media Type Thick 2 (151-210 g/m2) Weight 91-210 g/m² Duplexing See page 100 for supported sizes Envelopes Print on the front (side where the recipient's address is written) side only. Some parts of the envelope consist of three layers of paper-the front, back, and flap. Anything printed in these layered regions may be lost or faded. You can print continuously with envelopes. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 (Manual Feed Tray) Tray 2 Orientation Face down Driver Envelope Media Type Duplexing Not supported 1 envelope. Not supported Use envelopes that are „ Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps " Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „ Approved for laser printing „ Dry DO NOT use envelopes that have „ Sticky flaps „ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „ Transparent windows „ Too rough of a surface „ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „ Been presealed 4-6 Media Types