Konica Minolta magicolor 5670EN magicolor 5650/5670 Reference Guide - Page 163
Options Installed, HDD + CF 1GB Over
View all Konica Minolta magicolor 5670EN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Parameters Image RGB Intent Image RGB Source Options Installed Parameters Duplex Unit Output Tray Unit Paper Source Unit Paper Source Unit 2 Printer Memory Storage Settings Specifies RGB intent for image as Vivid, Photographic, Relative Color, or Absolute Color. The default setting is Photographic. Specifies RGB source for image as None, sRGB, Adobe RGB (1998), Apple RGB, ColorMatch RGB, or Blue Adjust RGB. The default setting is sRGB. Settings Select Enable if the optional duplexing unit for the printer has been installed. The default setting is Disable. Select Enabled if the output tray unit (staple finisher) is installed. Select Disabled if it is not installed. The default setting is Disabled. Select Unit 3 or Unit 3 + Unit 4 if the optional trays for the printer have been installed. The default setting is Disable. Select MPC if 250 sheet tray is installed. Select Standard if 500 sheet tray is installed. The default setting is Standard. Select 256 MB, 512 MB, 768 MB, or 1024 MB if the optional memory for the printer has been installed. The default setting is 256 MB. Select None, CF (1GB Under), CF (1GB Over), HDD, HDD + CF (1GB Under) or HDD + CF (1GB Over) for the storage unit that is installed. The default setting is None. Specifying Printer Driver Settings 143