Kyocera Ai4040 Ai-4040/5050 Instruction HB - Page 137

q Copy default setting Copy default setting 1 Exposure mode 2 Exposure steps Content of copy default setting This is the copy exposure selection mode. Auto (automatic exposure mode) or manual (manual exposure mode) can be selected. 7 or 13 exposure levels can be set for the manual exposure mode. Page 136 136 3 Auto exposure adjustment If the overall exposure in the auto exposure mode is too light/dark, use this to adjust it. 136 4 Manual exposure adjustment If the overall exposure in the manual exposure mode is too light/dark, use this to adjust it. It can be set separately for each mode; "Text", "Photo" and "Mixed". 137 5 Quality Initial value for the copy quality mode can be selected. 137 6 Paper selection Select whether paper of the same size as the original is selected automatically when it is set, or whether the size of the paper is selected manually. 137 7 Job Programming 8 Default drawer 9 Zoom mode 0 Copy limit: with # keys ! Custom border erase size @ F&B p. margin "Regular" or "Off the platen" can be selected for the program mode setting. "Regular": Any of the program number "1" to "7" can be selected by touching the program key. "Off the platen": The content of program "1" can be accessed automatically by touching program key. Copying is possible as it is. A frequently-used drawer can be selected automatically. When the Reset key is pressed without setting an original, etc., the specified drawer in this mode can be selected. * The stack bypass tray can not be set as a default drawer. The size zoom mode (page 49) or standard zoom mode (page 48) can be selected for enlarge/reduced copying (Zoom mode). The pre-set limit on the number of copies can be set for one copying operation is 999, but the limit can be lowered. Set the sizes of the originals for "custom size" of border erase modes (page 64). Borders outside the defined area will be erased. Whether the front & back page margin is to be displayed or not for the margin copy setting screen on page 56 can be set. 138 138 138 139 139 140 # Drawer for insert sheet The drawer of the insert sheets to be set can be selected in the inter mode (page 67). 140 $ Rotate sort % Create shortcut (#1, #2) Set the normal sort copy or rotate sort copy by touching the sort key. The direction of each paper can be changed in the rotate sort copy so that it makes easier to sort the copies. * This setting is not displayed when the copier is equipped with the optional finisher. The frequently-used function keys can be displayed on the basic screen. This makes easier to select the frequently used function. 140 141 ^ Customize GUI #1 - #5 The frequently-used function will be displayed soon after touching the "Added" key if it is set in this mode, so that it makes easier to set the functions. Up to five functions can be set. 141 132