Kyocera ECOSYS FS-1370DN FS-1370DN Installation Instructions - Page 1
Kyocera ECOSYS FS-1370DN Manual
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Clearance FS-1370DN 200 mm (7-7/8") 300 mm (11-13/16") 300 mm (11-13/16") 200 mm (7-7/8") Installation Guide Environment • Temperature: 10 to 32.5 °C (50 to 90.5 °F) • Humidity: 15 to 80 %RH • Power Supply: 120 V AC, 60 Hz / 220 to 240 V AC, 50/60 Hz 500 mm (19-11/16") CAUTION: Be sure to provide enough space around printer. Prolonged use without sufficient clearance may cause overheating. Important: Do not install the printer where temperature or humidity is outside the recommended range. Print quality may suffer and there will be an increased chance of paper jams. 1 Unpacking 1 Unpack the printer and all its included components. 2 Remove the packing item. 3 Check the parts and components. Printer CD-ROM Manuals and Other Printed Materials Toner Container Power Cord 2 Installing the Toner Container 1 Open the top cover. 2 Turn the lock lever to the unlock position. 3 Take the toner container from the bag. Shake the new toner container at least 5 times as shown in the figure in order to distribute the toner evenly inside the container. 4 Remove the label from the toner container. 5 Install the new toner container into the printer. 6 Push firmly on the top of the container at the positions marked PUSH, until you hear a click. 7 Turn the lock lever to the lock position. 8 Close the top cover.