Kyocera ECOSYS M3145idn M3655idn/M3660idn/M3145idn/M3645idn Operation Guide - Page 404
Line Text Priority, Prevent Bleed-through
View all Kyocera ECOSYS M3145idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 404 highlights
Troubleshooting > Troubleshooting Symptom Checkpoints Cannot print with USB memory. USB memory not recognized. Is the USB host blocked? ― Printouts have vertical lines. Is the slit glass dirty? Corrective Actions Reference Page Select [Unblock] in the USB host settings. page 8-41 Check that the USB memory is securely ― plugged into the machine. Clean the slit glass. page 10-3 Dirt on the top edge or back Is the interior of the machine dirty? of the paper. Clean the interior of the machine. page 10-4 Part of the image is ― periodically faint or shows white lines. Run [Drum Refresh 1]. page 10-30 Print on the back of the ― sheet is visible on the front. Set [Prevent Bleed-through] to [On]. page 6-17 page 8-15 [Multi originals fed at Is the sensor dirty with paper dust, etc.? Open the document processor cover ― once.] is often displayed and clean two sensors shown in the though no multi originals are figure below with dry cloth. not fed. Lines appear on ruled lines. Is the paper damp? ― Replace the paper with new paper. page 3-2 Select the [System Menu/Counter] key ― > [Adjustment/Maintenance] > [Service Setting] > [Transfer Adjustment], and set to [Line Text Priority]. 10-16