Kyocera ECOSYS M3145idn M3655idn/M3660idn/M3145idn/M3645idn Fax Operation Guid - Page 41
Select transmission settings., Select [OK]., On Hook, Sub Address, Detail Settings, Next Dest.
View all Kyocera ECOSYS M3145idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Sending Faxes > Methods For Entering the Destination 3 Select transmission settings. Sub address communication, encrypted transmission, transmission start speed and ECM can be set. It is possible to change the transmission settings by selecting [On Hook], [Sub Address] or [Detail Settings]. Key Description On Hook Select [On Hook] to connect to the telephone line. When the FAX number has been entered, the machine starts dialing to the receiving system. After selecting this key, you can dial the number of the receiving system using the numeric keys. Manual Send (page 3-19) Sub Address Set this to transmit using a Sub Address. Sub Address Transmission (page 5-14) Detail Settings TX Start Speed This is set to change the transmission start speed. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. NOTE Normally this should be used with the default setting. ECM ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. Encrypted Transmission This is set when using encrypted transmission to send the data. Encryption (page 5-23) 4 Select [OK]. Entry of the destination finishes. NOTE When On is selected in Entry Check for New Dest., a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and select [OK]. Machine's Operation Guide Select [Next Dest.] to enter the next fax number. Broadcast Transmission (page 3-11) In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission to send as one job. Machine's Operation Guide 3-8