Kyocera ECOSYS M3660idn M3145idn/M3645idn/M3655idn/M3660idn Driver Guide - Page 84
Storing a Private Print Job, Job Storage, Storing a Job Storage Job
View all Kyocera ECOSYS M3660idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Job Storing a Private Print Job 1 In the Job tab, click the Job storage (e-MPS) icon. 2 In the Type list, select Private print. 3 Select a method for choosing an access code: If you want to use the same access codes for print jobs, clear Prompt for access code, and then type four numbers in the Specify access code box. If you want to use different access codes for print jobs, select Prompt for access code. When you click OK in the Print dialog box, type the access code in the Private Print dialog box that appears. 4 Click OK in all dialog boxes. Job Storage Job storage is a Job storage (e-MPS) option that stores a print job permanently on the storage device for printing later. You also have the option of protecting the print job from unauthorized printing by using an access code. This feature is available when a storage device is installed and selected in Device Settings. Job storage is useful for jobs that need to be available for printing at any time, even if the printing system has been turned off and turned on again. Job storage jobs can only be removed manually from printing system memory. If desired, you can attach a four-digit access code to a Job storage job, so that you can print a job without anyone else seeing it, or restrict printing to approved users. When the access code is used, the job is not printed until a user prints it at the printing system's operation panel. After the job is printed, it remains in printing system memory. The number of Job storage jobs that can be stored is limited only by the storage capacity of the storage device. You can manually delete a job at the operation panel. Warning: A print job can replace a job on the storage device having the same user name and job name. To prevent this, select Use job name + date and time under Overwrite job name. Note: If you are using this feature with an SD card, clear the RAM disk check box in Device Settings. The RAM disk settings in the device must also be turned off. Storing a Job Storage Job 1 In the Job tab, select the Job storage (e-MPS) icon. 2 In the Type list, select Job storage. 3 Select a method for choosing an access code: When you want to use the same access codes for print jobs, clear Prompt for access code, and then type four numbers in the Specify access code box. 9-5 User Guide