Kyocera ECOSYS M6630cidn M6630cidn/M6635cidn Fax Operation Guide - Page 22

Before Using the Fax Machine > Quick Setup Wizard (Fax Setup) Quick Setup Wizard (Fax Setup) In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using the fax system. Fax setup items Step Setting item 1.Dialing/RX Mode Dialing Mode Reception Mode Auto (DRD) 2.Local Fax Info. Local FAX Name Local FAX Number Local FAX ID 3.Sound TTI Speaker Volume Monitor Volume 4.Rings 5.Redial Job Finish Buzzer Normal Answering Machine FAX/TEL Switch Retry Times Description Reference Page Select the dialing mode according to the line type. 8-8 Select the reception mode. 8-9 Select the reception pattern. 8-9 Register the local fax name printed on the fax on the receiving 8-7 system. Enter the local fax number to be printed on the fax on the 8-7 receiving system. Enter the local fax ID. The local fax ID can limit other parties 8-7 with which you can communicate. Enter the four-digit local FAX ID number. Select whether or not to print the local fax information on the 8-7 fax on the receiving system. Set the volume when selecting [On Hook]. 8-5 Speaker Volume: Volume of the built-in speaker when the line is connected by selecting [On Hook]. Set the monitor volume. 8-5 Monitor Volume: Volume of the built-in speaker when the line is connected without selecting [On Hook] such as in memory transmission. Emit a sound when a print job is normally completed. 8-5 Set number of times to let phone ring before answering a call. 8-9 Set number of times to let phone ring before taking over from 8-9 the answering machine. Set number of times to let phone ring before switching the FAX 8-9 and the phone. Set the number of redials. 8-8 NOTE The settings can be changed in the system menu. Default fax settings (page 8-2) 2-7