Kyocera ECOSYS M6630cidn M6630cidn/M6635cidn Fax Operation Guide - Page 51
Continuous Scan, FAX Direct Transmission
View all Kyocera ECOSYS M6630cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Sending Faxes > Continuous Scan Continuous Scan Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned continuously until you select [Finish Scan]. FAX Direct Transmission Scans all originals into memory, then dials and sends. Scanning of the originals starts after the connection is made with the receiving system, allowing you to verify that each page of the fax has been properly sent. Setting for Direct transmission On Off Description Starts direct transmission. Dials the receiving system, and after the communication has started, originals are scanned. Starts memory transmission. After originals are scanned into memory, the communication starts. NOTE In direct transmission, you can designate only one destination for one transmission. In the basic screen for sending, select [Direct]. This selects the direct transmission method and the keys on the touch panel are highlighted. Cancelling Direct Transmission During direct transmission, to cancel communication during transmission, select the [Stop] key on the operation panel or [Cancel] on the touch panel. The originals that have been scanned are ejected, and the screen returns to the send default screen. When originals remain in the document processor, take them out. NOTE In some cases, transmission may take place even if the [Stop] key or [Cancel] is selected. 3-18