Kyocera ECOSYS P2135dn ECOSYS P2135dn Operation Guide (Basic) - Page 43
Command Center RX - default admin password
View all Kyocera ECOSYS P2135dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Command Center RX If the machine is connected to the network, you can configure various settings using Command Center RX. This section explains how to access Command Center RX, and how to change security settings and the host name. For details on Command Center RX, refer to the Command Center RX User Guide. Note To fully access the features of the Command Center RX pages, enter the User Name and Password and click Login. Entering the predefined administrator password allows the user to access all pages and Settings on the navigation menu. The factory default setting for the default user with administrator privileges is shown below. Login User Name Login Password Admin Admin * Upper case and lower case letters are distinguished (case sensitive). Settings that the administrator and general users can configure in Command Center RX are as follows. Setting Device Information Job Status Description The machine's structure can be checked. Configuration, Counter, About Command Center RX Displays all device information, including print jobs and job log history. Printing Jobs Status, Printing Job Log Administ- General rator User Device Settings Configure the advanced settings of the machine. Paper/Feed/Output, Energy Saver/Timer, Date/Time, System - Function Settings Configure the advanced function settings. Common/Job Defaults, Printer, E-mail - Network Settings Configure the network advanced settings. General, TCP/IP, Protocol - Security Settings Configure the security advanced settings. Device Security, Network Security, Certificates - Management Settings Configure the advanced management settings. Authentication, Notification/Report, History Settings, SNMP, Reset - Connecting and Printing 3-7