Kyocera ECOSYS P3050dn ECOSYS P3045dn/P3050dn/P3055dn/P3060dn Operation Guide - Page 125
Auto Cass. Change (Auto Cassette Change setting)
View all Kyocera ECOSYS P3050dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Operation Panel Auto Cass. Change (Auto Cassette Change setting) You can select the following actions when the paper runs out in the paper source while printing. Off The printer displays Load paper cassette #. (# is a cassette number) or Load paper in MP Tray, and stops printing. Load the paper according to the paper source displayed to resume printing. To print from the other cassette, press [Alt.] ([Left Select]). Press or to select the desired paper source, and then press [OK]. On The printer continues printing automatically when the other cassette contains the same paper as the currently used paper cassette. Auto Cass.Change: 01 Off 02*On 1 In the Print Settings menu, press or to select Auto Cass.Change. 2 Press [OK]. The Auto Cass.Change screen appears showing the auto cassette change settings. 3 Press or to select Off or On. 4 Press [OK]. The auto cassette change is set and the Print Settings menu reappears. Note You can also configure the Auto Cassette Change in the Command Center RX. Access to the Command Center RX, and then go to Function Settings > Printer page. For more information on access to the Command Center RX, refer to the Command Center RX User Guide. MP Tray Priority (the settings for priority paper feed from the MP tray) If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in the paper feed. MP Tray Priority: 01*Off 02 Auto Feed 03 Always 1 In the Print Settings menu, press or to select MP Tray Priority. 2 Press [OK]. The MP Tray Priority screen appears showing the available MP tray priority mode options. Off (The printer driver settings are followed.) Auto Feed (If Auto is selected in the printer driver and there is paper in the MP tray then the paper feed will be from the MP tray.) Always (If there is paper in the MP tray then the paper feed will be from the MP tray regardless of what is set in the printer driver.) 3 Press or to select the desired MP tray priority mode. 4 Press [OK]. The MP tray priority mode is set and the Print Settings menu reappears. 4-45